Gicam WIN6, Руководство пользователя

Страница: 24 / 28

Troubleshooting Guide
Problem Possible cause Solution
The threshold control does not
work The thresholds have not been set Set the threshold values by follow-
ing the relevant instructions
The instrument checks the thresh-
olds incorrectly Parameters for the threshold con-
trol have not been set Make sure that they are set accord-
ing to the desired modes
The semi-automatic zero-function
does not work The gross weight exceeds the ac-
tion limit of semiautomatic zero To restore zero the weight must be
calibrated
The weight does not stabilize Wait for the weight to stabilize or
adjust the weight filter parameter
The autotara function does not
work The gross weight is negative or has
reached the maximum capacity Check the gross weight
The weight does not stabilize Wait for the weight to stabilize or
adjust the weight filter parameter
Serial communication does not
work properly The connection was not correctly
executed Check the connection as described
in the installation manual
Baud rate and data format have not
been set correctly Check the settings in the serial
menu
Pagina – page – Seite 22