Page
8
of
56
USE AND MAINTENANCE MANUAL
Code MUT 088
Rev. 1
WARNING: DANGER TO THE OPERATOR/USER In reference to dangerous
situations that can occur with the use (including installation and maintenance) of
the awning. Failure to comply with these messages may endanger the safety of
persons.
WARNING: In reference to dangerous situations that may occur due to the
PRESENCE OF ELECTRICAL vOLTAGE. Failure to comply with these messages
may endanger the safety of persons and the integrity of the awning.
WARNING: In reference to dangerous situations that can occur with the use of the
awning to prevent damage to objects and the awning itself.
IMPORTANT: Useful information and tips to be observed to ensure proper use
and preservation of the awning. Failure to observe these messages can affect the
integrity and / or resistance of the product.
This User's Manual was prepared in accordance with as indicated in EN 13561 and section
1.7.4 of Annex 1 to Directive 2006/42/EC and taking into account the normal use of the awning
in order to inform, together with other instructions for use affixed to the awning itself, the
operators / users on residual risks that the products presents.
The awning complies with the “Construction products regulations - CPR 305/2011” and offers,
if properly installed, a resistance to wind load greater than those required by the Class 3 of the
UNI EN 13561 rule on "External awnings - Performance requirements including safety".
This Technical Classification ensures resistance to a wind that carries a maximum pressure
rating of 110 [N/m
2
] (Newton / sqm) similar to an wind insisting on the awning with a maximum
speed of 49 [km / h] corresponding to the 6th level of the Beaufort Scale.
The resistance to wind load was evaluated according to criteria related to those required by the
UNI EN 13561 and UNI EN 1932 rules, with the necessary safety margins.
The motorised version conforms as well as the relevant parts of the to the Machine Directive
2006/42/CE.
The CE Mark together with wind resistance characteristics according to UNI EN 13561 and
theself-certification document (Declaration of Performance DoP) are included in APPENDIX 0
and APPENDIX 1 on the last pages of this manual. The original Declaration of Performance DoP
issued by the manufacturer is kept by Gibus S.p.A.
Quick or careless preparation leads to improvisation, which is the cause of many accidents.
Before starting the installation work and before commissioning of the awning, carefully read
and strictly observe the following tips:
REGULATIONS AND SELF-CERTIFICATION DOCUMENTATION
1.3
- The instruction manual must be readily available for use by staff in charge of running and
maintenance;
- Keep the manual for the entire service life of the awning;
- In case of sale deliver the manual to the new owner of the awning;
- Use the manual in such a way not to damage all or any part of its content;
- In no case remove, tear or re-write any part of the manual;
- Keep the manual in a place protected from moisture and heat;
- If the manual is lost or partially damaged and then its complete content can no long be read, it
is advisable to request a new manual to the manufacturer.
In the following pages pay close attention to the following symbols and their meaning. Their
function is to highlight essential information such as:
www.gibus.com
Содержание MED OPEN FLY
Страница 2: ......
