12
SETTING OVEN CONTROLS
1. Press
.
2. Press the
to increase the time in one minute
increments. Press and hold the
to increase the time
in 10 minute increments. The timer can be set for any
amount of time from 1 minute to 11 hours and 59
minutes.
If the
pad is pressed first, the minute timer will
advance to 11 hours and 59 minutes.
3. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until
is pressed.
To make changes to the timer while it is in use:
While the timer is active and shows in the display, press
and hold the
or
to increase or decrease the
time remaining.
Changing between the temperature display
modes (°F or °C)
The electronic oven control is set to display in Fahrenheit
(°F) from the factory.
To change the temperature to display °C (Celsius) or
from °C to °F (control should not be set for Bake or
Self-clean when setting this feature):
1. Press
. "— —" appears in the display.
2. Press
and hold
until "
HI
" appears in the display.
3. Press
and hold
until F or C appears in the
display.
4. Press the
or
to switch between the display
modes (°F to °C or °C to °F).
5. Press any control keypad to return to normal operating
mode.
To set the timer:
The minute timer serves as an extra timer in the kitchen
that will beep when the set time has run out. The timer can
be used alone or while using other oven features. When
the timer is active, to briefly view information for any other
active feature, press the keypad for that feature.
Timer
Setting the clock
When the appliance is first powered up or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". The time of day must first be set in order
to properly operate the oven.
NOTES
To set the clock:
1. Press
once (do not hold keypad down).
2. Within 5 seconds, press and hold the
or
until
the correct time of day appears in the display.
• The clock cannot be changed when self-clean is active.
• (Some models) To turn the clock
OFF or ON
in the
display press
and hold for 15 seconds (acceptance
tone will sound) and then release. This feature does
not remove the set time of day from the memory of the
control. When the display is turned OFF the time of day
will reappear for a few seconds any time the
pad
is touched.
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
Changing to continuous bake setting:
1. Press
and hold
for 5 seconds until acceptance
tone sounds, "
— — hr
" will appear in display for
continuous cooking. The current time of day will return
to the display.
2. To cancel the continuous bake setting, press
and hold
for 5 seconds until acceptance tone sounds.
"
12hr
" will appear in display indicating that the control
has returned to the 12-Hour Energy Saving feature.
