Gibson GCG91226XA, Руководство пользователя

Страница: 23 / 28

Adjusting the minimum gas level on the
oven burner
1. Disconnect the appliance from the
electricity.
2. Remove the knob for the oven functions.
If there is no access to the bypass screw
dismount the control panel before
adjustment start.
3. With a thin and flat screwdriver adjust the
bypass screw A.
The model determines the position of the
bypass screw A.
A
Levelling
CAUTION!
Remove all the accessories from
the oven.
1. Open the lid of the appliance and
disassemble it.
2. Disassemble the pan supports and all the
burner assemblies.
3. Put the appliance on the sidewall on a
clean and smooth surface. Place each
foot into a separate hole, in the plinth, and
rotate it clockwise.
B
4. If the floor is not equally flat, use the
adjustable feet on the bottom of the
appliance to set a stable position for the
appliance.
To install all the accessories, do the first step
in an opposite sequence.
Electrical installation
WARNING!
The manufacturer is not
responsible if you do not follow the
safety precautions from Safety
chapters.
This appliance is supplied with a main plug
and a main cable.
23