ENGLISH
MODULAR SERIES - HIGH PERFORMANCE SLACKLINE EQUIPMENT -
As a pioneer in easy to use - plug and play - slackline sets, GIBBON has extended their product
range to modular systems. The MODULAR SERIES product range is placed between sets
and single parts, making sure advanced slacklining is reliable and easy to handle. Always
wondered what single parts to combine to make an expert slackline? We’ve got you covered!
The GIBBON MODULAR SERIES contains modules put together from the best slackline parts
on the market to ensure you have selected the right equipment for an easy to handle, reliable,
and high performance slackline!
Only to be used with GIBBON products as part of the GIBBON MODULAR SERIES. It is
strongly advised not to use any other material or slackline systems with the GIBBON
MODULAR SERIES.
1. Installation of the first TRICK TENSION ANCHOR
1.1 Wrap TREE WEAR XL around tree or pole and fasten with velcro patch (A)
1.2 Wrap round sling around tree and use the velcro straps (B) to secure.
1.3 Connect round sling and ratchet (upside down) with shackle (C). Make sure the pin is fully
screwed back in and the shackle screw is facing the ratchet strap. Avoid closing the screw with
too much force, or else the shackle will become difficult to open after use.
Leave the installation hanging and approach other side!
2. Installation of second TRICK TENSION ANCHOR
2.1 Wrap the TREE WEAR XL around tree or pole and fasten with velcro patch (A)
2.2 Wrap round sling around tree and use the velcro straps (B) to secure.
2.3 Connect round sling and ratchet (upside down) with shackle (C). Make sure the pin is fully
screwed back in and the shackle screw is facing the ratchet strap. Avoid closing the screw with
too much force, or else the shackle will become difficult to open after use.
3. Installation of slackline webbing (ANDY LEWIS TRICKLINE, SLAMINA or EPIC PRO) on
first TRICK TENSION ANCHOR
3.1 Start with either side and pull the ratchet extension release lever (D) and unfold ratchet
extension lever (E) 180° until it locks in place in a flat position.
3.2 Release ratchet lever (G) by pulling on the safety handle (F) to unfold ratchet to 90°.
3.3 Thread the chosen webbing (H) through drum slot (I) of the ratchet, min. 1 foot / 30cm
3.4 Hold webbing and excess webbing together tightly under tension and start applying the
ratchet lever handle (G) to coil up the drum more than one full rotation so that the slackline is
fixed. The webbing is then anchored.
