step 6
step 10
step 7
step 8
step 5
step 4
step 9
Connect the power source plug into a
grounded electric outlet (AC 110-240 volts)
and make sure that all poles are fully inserted
into the socket. NOTE: Some Hybrid
bicycles are equipped with a “Euro-style”
power source plug. First insert that plug
into the supplied adapter. Then insert the
adapter into a grounded electric outlet (AC
110-240 volts).
Make sure that the EnergyPak is secured
in the “LOCK” position, so that it cannot
move from side to side.
lights up red. The light should remain
6 hours) the light will go out. The
EnergyPak is fully charged.
Disconnect the EnergyPak from the charger after the charge is
completed. Unplug the charger’s power source plug from the
electrical outlet.
KEEP THE AREA WHERE THE ENERGYPAK IS
CHARGED WELL-VENTILATED AND FREE
FROM LITTER OR ANYTHING ELSE COMBUSTIBLE
TO AVOID FIRE FROM SPARKS OR OVERHEATING!!
DO NOT CHARGE ENERGYPAK(S) FOR MORE
THAN 24 HOURS!!
Place the EnergyPak in a horizontal
position and then insert the charger plug
into the EnergyPak’s charging socket.
Lift the EnergyPak pack out of its holder.
Mount the EnergyPak into its holder.
Step A
Slide the EnergyPak pack into its holder at a
45-degree angle. Make sure the “GIANT”
logo on the EnergyPak is facing the outside
of the bicycle.
Step B
Replace the handle. Gently pivot the
EnergyPak to an upright position until
the EnergyPak snaps into place. If the
EnergyPak does not pivot easily, remove it
and reposition it in the holder and try again.
7
8
caution
caution
Giant
logo
Handle
Step A
Step B