![Giant-Vac M32125KAW Скачать руководство пользователя страница 14](http://html.mh-extra.com/html/giant-vac/m32125kaw/m32125kaw_assembly-instructions-and-operators-manual_2221857014.webp)
GVTP GM32-R0103.1
4
unit operation (cont.)
MOWER OPERATION
GENERAL RULES TO OBSERVE BEFORE
AND DURING OPERATION:
•
Inspect your unit before each and every use. Check for worn, bent or broken components, loose fasteners,
low or flat tires, etc., and repair or replace prior to operation.
DO NOT OPERATE A DEFECTIVE UNIT –
SERIOUS INJURY OR DEATH CAN RESULT.
•
Clear the entire work area of all debris that could cause damage to or become entangled in the unit. Rocks
and large branches can wedge themselves between the blades and deck, causing engine seizure, blade
damage, or personal injury. If in doubt, remove it.
•
Do not start unit until you are ready to begin mowing, and promptly shut off unit as soon as operation is
complete.
•
Keep hands, feet and clothing away from rotating parts. Never place your feet or hands under mower deck
when the engine is running.
•
Use proper discretion in selecting your debris removal pattern, especially on uneven terrain. Avoid steep
hills, especially if surface is wet.
Do not travel straight down slopes exceeding 14 degrees. If tires begin to
slip when climbing a slope, the grade is too steep for safe operation. Angle the unit to a less steep slope
until tires stop slipping and traction is regained.
•
Be keenly aware of your surroundings while operating unit – children and pets can pop out of nowhere.
•
Learn to listen to your machine – being aware of what a well-running unit sounds like can alert you to a
potential problem. A straining engine or clanging blades or a slapping belt mean that trouble is almost sure
to follow.
ENGAGING THE CUTTING BLADES:
Note: Never engage the mower blades until you are ready to mow and be certain to disengage them
when finished. Never attempt any adjustment or repairs when the blades are engaged.
125KAW & 13BS -
•
To engage the cutting blades, simply push the
blade engage lever, located to the left side of
the fuel tank, into the forwardmost position. To
disengage, pull the lever back against the
handle dash. Always be sure cutting blades
are disengaged before stopping the mower.
ENGAGE
DISENGAGE