background image

IMPORTANT

READ THESE INSTRUCTIONS CAREFULLY BEFORE BEGINNING THE INSTALLATION. PROPER INSTALLATION 
WILL PROVIDE SAFE AND EFFICIENT SERVICE AND AVOID NEEDLESS EXPENSE NOT COVERED BY THE 
WARRANTY. READ THE PRODUCT WARRANTY CONTAINED IN THIS MANUAL AND REMEMBER TO FILL 
OUT AND RETURN TO THE MANUFACTURER ALL RELEVANT WARRANTY CARDS AND CERTIFICATES. 
SHOULD YOU HAVE ANY QUESTIONS, PLEASE CONTACT YOUR LOCAL DEALER OR REFER TO THE 

GETTING SERVICE FOR YOUR WATER HEATER

 SECTION OF THIS MANUAL.

SAVE THIS MANUAL FOR FUTURE REFERENCES.

RESIDENTIAL OIL-FIRED WATER HEATERS 

OWNER’S MANUAL

INSTALLATION AND OPERATING INSTRUCTIONS

If the information in these instructions is not 

entirely followed, a fire or explosion may 

result causing property damage, personal 

injury or death.

•  DO  NOT  STORE,

 use gasoline or any 

other flammable vapours or liquids in the  

vicinity of this or any other appliance.

•  DO NOT USE

 gasoline, crank case oil or oil 

containing gasoline.

•  DO  NOT  TAMPER

 with the unit or  

controls.

•  DO NOT LEAVE

 paper or rags close to the 

burner or the water heater.

 

WHAT TO DO IF YOU DETECT OIL

• 

Immediately call your oil supplier.

Installation and service must be performed by a quali-

fied installer, service agency or the oil supplier.

WARNING

AVERTISSEMENT

DANGER

WARNING

AVERTISSEMENT

DANGER

For your records, write the model and serial number here:

 

Model # ________________________________

Serial # ________________________________

This water heater 

IS NOT

 design certified for 

installation outdoors.

GI-IM001En-0211

54000006

© 2011  Giant Factories Inc.  Printed in Canada

C          US

ISO 9001

ENREGISTRÉ

ISO 9001

REGISTRED

Man inst Oil -GI-IM001En-0211.indd   1

11-10-12   2:11 PM

Содержание OG32



















Отзывы: