manualshive.com logo in svg

Giant Factories ANSI Z21.10.3, Руководство пользователя

Поделиться
Скачать
Giant Factories ANSI Z21.10.3 Скачать руководство пользователя страница 1

DO NOT

 store or use gasoline or other flammable vapors and 

liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS:

• 

DO NOT

 try to light any appliance.

• 

DO NOT

 touch any electrical switch.

• 

DO NOT

 use any phone in your building.

• 

From a neighbor’s phone, immediately call your gas sup-

plier. 

Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, 
service agency or the gas supplier.

DIRECT VENT TANKLESS WATER HEATERS

OWNER’S MANUAL

INSTALLATION AND OPERATING INSTRUCTIONS

IMPORTANT

READ ALL OF THE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR OPERATING THIS WATER HEATER. 
THIS MANUAL PROVIDES INFORMATION ON THE INSTALLATION, OPERATION, AND MAINTENANCE OF THE 
WATER HEATER. FOR PROPER OPERATION AND SAFETY IT IS IMPORTANT TO FOLLOW THE INSTRUCTIONS 
AND ADHERE TO THE SAFETY PRECAUTIONS. A LICENSED PROFESSIONAL MUST INSTALL THE WATER 
HEATER ACCORDING TO THE EXACT INSTRUCTIONS. 

THE CONSUMER MUST READ THE ENTIRE MANUAL 

TO PROPERLY OPERATE THE WATER HEATER AND TO HAVE REGULAR MAINTENANCE PERFORMED.

© 2015 Giant Factories Inc.  Printed in Canada

GI-IM045

En

-1015

For your records, write the model and serial number 
here: 

Model # _________________________________________

Serial # _________________________________________

R

R

R

DANGER

WARNING

CAUTION

AVERTISSEMENT

ATTENTION

If the information in these instructions is not followed exact-
ly, a fire or explosion may result causing property damage, 
personal injury, or death.

FOR INDOOR 

APPLICATIONS ONLY

UGTC-199N

UGTC-199P

UGTC-152N

UGTC-152P

ANSI Z21.10.3 • CSA 4.3

Содержание ANSI Z21.10.3





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды