Giant Alarm System Co., Ltd
Tel: 86-595-2249 9516
Fax: 86-595-2249 2516
Web:
www.jujiang.net
or
www.globalsources.com/giant.co
or
www.jujiang.en.alibaba.com
- 3 -
silence state), the lights flashing at the same time to show where the car is.
10. Triggering memory
After relieved the guard state, open the door. The lights flashing
continuously,it will be off after 1 minute,to show the car has been triggered.
11. Power-cut memory
After the alarm system suffers power cut , no matter how long it is, it will
back to the former guard state after power on for 5s.
12. Parking lot warning
Open the door after parking, the lights flash at once to show the coming car
paying attention to avoid the accident.
13. LED warning light
In guarding, LED flashes once, stop for 1s.
After vibrated trigger: LED flashes twice, stop for 1s,then flashes 3 times,stop
1s.and so on
After switch trigger: LED flashing continuously…
14.Learning code
open the door, turn ACC to ON, step on the footbrake and long press
Emergency relieving at the same time, the system will be disarmed in 7
seconds with one sound of the siren.then it will enter into alarm state when
turn off the ACC.
15 Emergency relieving
Open the door,turn on ACC,
step on the footbrake,and long press
Emergency
relieving at the same time, siren sound once means relieve after 7s enter into alarm state.
16. adjust sensitivity
Long press on
+
at the same time, siren sound once means one
sensitivity level, siren sound twice means two sensitivity level, siren sound
three time means three sensitivity level,thereinto, one sensitivity level is least
sensitivity,third sensitivity level is the most sensitivity.(note:External
vibration sensor is void)
