1
ESP-M1/M2
Ver V1.0
Fentures
■ SOC characteristics
Peripheral for Module
●
Built-in Tensilica L106
ultra-low power
●
2*UART
Consumption 32-bit cpu, the main frequency
●
1*En;
Can be 80MHz and 160MHz, also support
●
1*ADC;
RTOS;
●
1*wakeup pin;
●
Built-in TCP/IP protocol stack;
●
1*HSPI;
●
Built-in 1 channel 10-bit high precision ADC;
●
1*I2C;
●
The outeide interfaces have HSPI, UART,I2C,
●
1*I2S;
I2S,IR Remote Control, PWM, GPIO;
●
MAX 10* GPIOs;
●
The deep-sleep current is about 10uA, and the
■
Working temperature:-40
℃
-125
℃
Cut-off current is smaller than 5uA;
■
Module size:
●
Can be wake-up within 2 ms, and connect to
12.3*mm*15mm;(M1 version)
Transmit data package;
12.3*mm*20mm;(M2 version)
●
the consume power is smaller than 1.0mW
Application
(DTIM3) when at standby status;
●
Serial Transparent transmission;
●
Built-in 1M byte for SPI Flash.
●
WiFi prober;
●
Smart power piug/Smart LED light;
■
Wi-FI characteristics
●
Mesh networks;
●
Sensor networks;
●
Support 802.11 b/g/n/e/i
●
Wearable electronics;
●
Support three modes: Station, SoftAP, and
●
Securit ID label;
STA;
●
Wireless location recognition;
●
Support Wi-Fi Direct(P2P);
●
Wireless location system beacon;
●
Support hardware acceleration for CCMP
●
Industrial wireless control;
(CBC-MAC,computation mode),TKIP(MIC,
Module Type
RC4), WAPI(SMS4), WEP(RC4), CRC;
●
P2P find, P2P GO mode/GC mode and P2P
Module Structure
Power management;
