Gianni Triride 1560507, Руководство пользователя и обслуживание

Страница: 47 / 56

TRIRIDE s.r.l.
ManUso_TRIRIDE_eng_r06 20/09/2020 Pag. 43 di 51
USER MANUAL AND MAINTENANCE
14.2 Authorised Technical Support
14.3 Checking Tire Pressure and Changing the Tire
14.4 Check the Tightening Torque
14.5 Brake Check
Ensure that your Triride is always kept in good condition, with the necessary care and maintenance carried
out by trained and qualified personnel of the Authorised Technical Service.
For all problems, contact the Authorised Technical Service directly, indicating the serial number that
uniquely identifies each appliance, found on the label on the Triride frame.
You can contact your dealer or Triride Customer Service directly via the contact information on the back
of this manual.
Following installation, to guarantee your personal safety and maintain correct functioning of Triride, always
check that the tire pressure corresponds to what is indicated in this manual (Tab. section 9.1) and that the
tires are in perfect condition and do not have surface irregularities.
To change the tire, contact the Authorised Technical Service or TRIRIDE S.R.L. or a centre specialised in
maintenance for bicycles and motorcycles.
Check that the screws and connections are firmly tightened. The tightening torque for the screws is:
M5 screws: 7 Nm M8 screws: 15 Nm M6 screws: 10 Nm
Check that when the brakes are activated, the disk is pressed sufficiently by the brake pad for effective
braking.
When a Triride device is sent to the company for maintenance or breakdown assistance, a
general check of the structural and wear parts will be carried out automatically to ensure their
safety.
It should be noted that no extra work will be carried out from those commissioned, unless specifically
authorized by the customer, however, if the customer refuses to perform indispensable and mandatory
works (eg brake pads, brake discs, bearings, damaged structural parts, tires, etc. ) for the safety of the
device, the company will issue a declaration of decline of responsibility and invalidity of the warranty
even on the work already carried out, as this is a clear negligence on the part of the user and non-
compliance with the provisions of this manual.