GK460 series of electric strikes are designed for use with cylindrical locksets and accommodate latchbolts up to 9/16" throw. The
strikes can be configured to fail-safe or fail-secure on site.
Specifications
The strike is polarity insensitive
Electric Strike Installation Instructions
GK460 Series
12VDC or 24VDC or 12/24VDC
70 ft-lbs
Operating Voltage
Operating Temperature
Humidity
Current Draw
Dynamic Strength
Latch Throw
Keeper Width
9/16" (15mm) maximum
1 7/16" (36mm)
Copyright © 2016 All Rights Reserved. P-MU-GK460 Published: 2017.03.31
Single Voltage:
0% to 85% Non-condensing
For indoor use: + 14°F to + 120°F
(-10°C to + 49°C)
Performance Level
Destructive Attack: Level 1
Line Security: Level 1
Standby Power: Level 1
Endurance: Level IV
250mA/12VDC or 150mA/24VDC
Dual Voltage:
300mA/12VDC, 150mA/24VDC
1500 lbs (680Kg)
Static Strength
Wiring Diagrams
(Polarity Insensitive)
Blue:N.O.
Single Voltage (12V or 24V)
Power
input
N.C. for "Fail-Safe" Operation
Green:COM.
Yellow:N.C.
White:12VDC Red:24VDC
White:12VDC Red:24VDC
N.O. dry contact output:
opened status
N.C. dry contact output:
when the micro switch is
pressed by latch bolt.
Latch Monitor
Control Device
For 24VDC Operation:
For 12VDC Operation:
Control Device
Control Device
Red
Black
White
Black
(Polarity Insensitive)
(Polarity Insensitive)
Dual Voltage (12V/24V)
N.O. for "Fail-Secure" Operation
Latch monitor wires
Rated: 0.3A/6VDC
Cylindrical Lever Lockset
Cylindrical Knob Lockset
Latch Monitor
Keeper
Strike Body
Faceplate
GK461M
(Model with Latch Monitor)
GK460
(27mm)
1 1/16
”
4 7/8” (123.8mm)
3 3/8” (85mm)
1 7/16” (36mm)
1 3/8” (
35mm)
1 1/4”
(31.7
5mm)
7 15/16” (201.6mm)
3 3/8” (85mm)
1 7/16” (36mm)
1 7/16”
(36.5mm)
Wiring methods shall be in accordance with NFPA70.
The GK460/461 series is intended to be used with UL Listed Exit Hardware.
The GK460/461 series shall not impair the intended operation of an
emergency exit.
The GK460/461 series shall not impair the operation of panic hardware mounted
on the door.
Stainless
Steel
GK460M-ST
GK461M-ST
Model
Latch
Body
Frame
Latch
Zinc Alloy
Hollow
Metal
Wood
9/16”
(15mm)
Zinc Alloy
Stainless
Steel
GK460
GK460M
GK460-ST
GK461
GK461M
GK461-ST
UL Requirements
Construciton
Monitor
250,000
100,000
250,000
100,000
250,000
100,000
250,000
100,000
Endurance
(Cycles)
Throw
For outdoor use: -31°F to +151°F
(-35°C to + 66°C)
