Digital Keypad Separated Controller System
Features:
6. Allows up to 1000+10 PINs.
7. The controller will be locked for 60 seconds upon 5 consecutive invalid PINs.
8. Controller with keypad sound to avoid incorrect key-in.
9.
3. Built-in light sensor detection switch for vandal resistance.
10. Non-volatile memory control can retain all PIN codes in event of power failure.
11.
5. Aluminum alloy casing with vandal resistant screws for enhanced safety and durability.
1. Epoxy sealed for waterproof function (IP65).
Operating Voltage
Current Draw
Pull in: 120mA/12 VDC
；
Holding: 60mA/12 VDC
Keypad
6X2 matrix keypad
(0~9 , , #)
Input
2 contacts for Request-To-Exit buttons
1 contact for Door Status Sensor
Output
LED Status Indication 2 LEDs – 4 Colors (Blue/Green/Yellow/Red)
Memory Volume
1000+10 PINs
Relay Rating
Relay Strike Time
01~99 seconds or manual mode(00)
Ambient Humidity
Operating Temperature
Mode
Signal
Status
Blue Indicator On
Green Indicator On
Standby
Red Indicator On
Yellow Indicator On
Programming Mode Entry
Green Indicator On
Red Indicator On
The slot position of first relay is available
The slot position of first relay is unavailable
LED
Programming
Green Indicator On
Red Indicator On
The slot position of second relay is available
The slot position of second relay is unavailable
1 Beep
Key entry, and Enter Programming mode
Standby
2 Beeps
Incorrect PIN
1 Beep
Correct input data, and Exit Programming mode
Beep
Programming
3 Beeps
Incorrect input data or Other invalid operation
First Relay Activated
Second Relay Activated
Power on, Standby
Specifications
Status Indications & Default Setting Parameters
Beep & LED Indications:
Pull in: 70mA/24 VDC
；
Holding: 40mA/24 VDC
DG-187
12~24VAC/VDC
5%~95% (Non-condensing)
-20
ƶ
C~60
ƶ
C
Max. 3A/30 VDC
2. Designed with piezoelectric keypad.
Additional input for anti-tailgating function to ensure high security access control.
Dual relays for electric lock devices and other access control systems.
2 relays (N.O./COM./N.C.)
Unit:mm
69.5
60.3
6
44
155
10
Operation Manual
1 contact for Anti-Tamper Alarm Tamp (-)
4. Digital keypad separated control system designed to enhance security.
