L. Troubleshooting Tips
Reduce a load power,
or turn on the appliance
first, then turn on the
inverter.
While using with
TV or audio, there
is snowflake on
the screen or noise
from the audio.
1. The switch is off.
2. The battery lead isn't
connected well
Cut off the load and let it cool naturally
for 10 to 30 minutes. Restart it after it
resumes to normal temperature. The
load power is too large, reduce the
total load power to the range of rated
power. Avoid blocking the vent and
improve the ventilation condition.
Reduce the ambient temperature.
1. Turn on the power switch.
2. Check the cables and make sure
they are tightly connected.
1. Keep the inverter far from
antenna.
2. Use screened antenna.
1. Use a true RMS multimeter to
measure, such as the model
FLUKE 177/179.
2.Try to maintain the input voltage in
the range of rated power
3.Change the battery of the
multimeter then test again.
1. RMS Multimeter measurement
error
2. The battery power of RMS
Multimeter is low. The input
voltage is too high or too low
Do not use it when the battery is
charging. Check the rated voltage
of the battery and make sure that
it is in the allowable range of the
input voltage.
Low input DC voltage
High input DC voltage
Overload
Over temperature
No output voltage,
buzzer sounds
continuously
No output voltage
Incorrect output
voltage
Cannot drive
the load
1. Load power is too large, or the
actual power of the appliance
exceeds nominal power.
2.The starting power is larger
than rated power (such as
motor).
Welcome to use GIANDEL power inverter. If you have any query during using our
inverter, please contact our service team by email: [email protected]
WARRANTY
This product is designed using the most modern digital technology and under very
strict quality control and testing guidelines. If however, you feel this product is not
performing as it should, please contact us: [email protected]
We will do our best to resolve your concerns. If the product needs repair or
replacement, make sure to keep your receipt/invoice, as that will need to be sent
back along with the package and prepaid to GIANDEL. You have a full 18 months
warranty from date of purchase.
This warranty is valid worldwide with the exception that freight and duty charges
incurred outside the contiguous 48 United States will be prepaid by customer.
Except as noted above, GIANDEL makes no warranty of any kind, express or
implied, including without limitation the implied warranties of merchantability and
fitness for a particular purpose. In no event shall GIANDEL be liable for indirect,
special or consequential damages. This warranty only applies to GIANDEL branded
products. All other name brand products are warranted by and according to their
respective manufacturer. Please do not attempt to return non-GIANDEL branded
products to us.
The following situations will void warranty:
1. The box is distorted, damaged or changed, and interior parts damaged because
of an exterior hit or drop not reported at time of delivery.
2. Connect the DC power incorrectly reversing the polarity.
3. Dismantled or repaired the unit by an unauthorized person.
4. The unit was damaged by incorrect installation or operating method.
For additional products, please visit our web site: www.giandel.com.au
-Modified sine wave inverters from 100W to 5000W
-Pure sine wave inverters from 200w to 5000W
To find out where to buy any of our products, you may also e-mail:
[email protected] or [email protected] .
5.
6.
I. HOW TO CHANGE FUSE
：
1. Firstly disconnect the inverter and external batteries, solar panels, load etc all the
connections.
2. Unscrew the side plate screws and pull out the bottom plate.
3. Use pliers to clamp car fuse inside the product, and pull out.
4. Replace the same specifications of the car fuse, and then install the bottom and side
panels, and screw well.
If all of the above methods have been tried, the product still not work properly. The internal
circuit of the product may be out of order. Please return the product to the supplier for
maintenance.
