12
11
3. Install expansion slot card
3
.
1 Install graphic card
This motherboard provides one interface slot for PCIE 16x AGP. When you install
the PCIE graphic card, you should note that groove of the golden finger must be
exactly engaged into the interface slot. In that process, it is preferable that you
are in grounded state, and you should carefully take out the graphic card from the
anti-static bag. Then align the graphic card to the PCIE slot and insert it. After
that, tighten the screw on the metal baffle.
2.3. Installing Memory
Please install the memory in accordance with the following procedures:
1.Remove the white buckle at the two ends of the interface slot for the memory;
2.Align the golden finger of the memory to the groove of the interface slot and
pay attention the concave hole of golden finger should be aligned to the convex
point of the slot.
3. Finally, insert the memory into the interface slot gently. If no error occurs at the
moment, insert the card forward in the slot till the white buckle is automatically
engaged in the concave hole at the two sides of the memory.
Note
In order to avoid damages to the motherboard or the components, the user must
make sure the power supply to the computer is turned off before the memory or
other component is installed or removed. As the groove is set at the golden
finger of the DDR DIMM, the memory can only be inserted into the slot with one
direction. During installation, the user only needs to align the golden finger and
the dual-channel groove of the interface slot and insert it gently. To avoid damage,
never apply excessive force in that process.
www.giadatech.com
switch out the white buckle
on both ends of the DIMM
Bracket Screw
Graphic card
Motherboard
