8
7
1. Layout of motherboard
2. Installing memory
Please install the memory in accordance with the following procedures:
·
Align the golden finger of the memory to the groove of the interface slot and
pay attention the concave hole of golden finger should be aligned to the
convex point of the slot.
·
Finally, insert the memory into the interface slot gently. If no error occurs at
the moment, insert the card forward in the slot till the white buckle is
automatically engaged in the concave hole at the two sides of the memory.
NOTE:
In order to avoid damages to the motherboard or the components, the
user must make sure the power supply to the computer is turned off before the
memory or other component is installed or removed. As the groove is set at the
golden finger of the DDR DIMM, the memory can only be inserted into the slot
with one direction. During installation, the user only needs to align the golden
finger and the dual-channel groove of the interface slot and insert it gently. To
avoid damage, never apply excessive force in that process.
www.giadatech.com
1
2
3
4
5
6
7
8
9
10
11
12
14
15
17 18
16
19
22
23
1. 2*Antenna hole
2. 2*USB2.0 port
3. 1*PS/2 KB + 2*USB2.0 port
4. 1*DVI port
5. 1*HDMI port
6. 1*RJ45 port + 2*USB3.0 port
7. 5jack Audio-out/Mic-in
(includes 1*optical S/PDIF-out)
8. CLR_CMOS
9. Front Audio
10. Front COM
11. Front USB1
12. Front USB2
13. Mini PCIe 2
14. Mini PCIe 1
15. Front Panel
16. ATX 24PIN power socket
17. SATA2 Socket
18. 3PIN SYS_FAN
19. DDR3 DIMM Slot
20. 3PIN CPU_FAN
21. AMD E-350
22. AMD Hudson M1
23. 4PIN ATX power socket
13
20
21
