Gi spark2, Руководство пользователя

Страница: 14 / 42

2.5 Step5 simple install
When you have completed your settings by pressing
the key, the Simple Install appears.
This menu allows you to configure 4 satellites with
diseqc1.0 or 16 satellites with diseqc1.1.
Use the left/right arrow keys to move the highlight to
the diseqc column and use the up/down arrow keys to
switch between diseqc1.0 and diseqc1.1.
Use the left/right arrow keys to move the highlight to
the LNB column and then select the correct LNB type that
you have on your dish.
Use the left/right arrow keys to move the highlight to
the Satellite column and then select the proper satellite
which you wish to receive at the appointed DiSEqC port.
Press red key to display scan setting and press ok
key to start scan. This will take some minutes to scan all
your configured satellites. As the scan proceeds, you will
see the progressive percent and the found programs.
After scan completed, you can exit the simple install
menu to start watching and enjoying all your HD and SD
programs.
If you exit the first installation without fully
completing the channel searching procedure, you may
not have all of the channels available. In this case, you
can use the Advancedinstall app to search for more
channels.