GHP Group TT1-15C, Руководство пользователя и инструкции по эксплуатации, Страница: 4 / 20

The heater is designed and approved for use as a construction heater under ANSI Z83.7, CSA 2.14.
It is hard to anticipate every use which may be made of this heater.
CHECK WITH YOUR LOCAL
FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS.
PROPANE TANK TOP CONSTRUCTION HEATERS
This is a direct-fired tank top construction heater for either indoor construction or outdoor use. Its intended
use is primarily the temporary heating of buildings or structures under construction, alteration or repair. All the
products of combustion generated by the heater are forced through the heater and released into the area being
heated. This heater operates at approximately 98%+ combustion efficiency but still produces a small amount
of carbon monoxide. Humans can tolerate small amounts of carbon monoxide for short periods. Carbon
monoxide can build up in a heated space and failure to provide adequate ventilation could result in poisoning
or death.
Other standards govern the use of fuel gases and heat producing products in specific applications.
Your local authority can advise you about these.
IMPORTANT: READ THIS USER’S MANUAL CAREFULLY AND COMPLETELY BEFORE TRYING
TO OPERATE OR SERVICE THIS HEATER. IMPROPER USE OF THIS HEATER CAN CAUSE
SERIOUS INJURY OR DEATH FROM FIRE, EXPLOSION AND CARBON MONOXIDE POISONING.
SPECIFICATIONS
TT15CL 15,000 Match
TT15CDGP 15,000 Match
TT15CPDG 15,000 Piezo
TT30CL 30,000 Match
TT30CDGP 30,000 Match
TT30CPDG 30,000 Piezo
cylinder)
TYPE
MODEL
”
1
. 7
m
c 1
. 8
1
”
11.2
m
c
4.
8
2
”
5.
5
1
m
c
4.
9
3
”
3
.
8
m
c
0
.
1
2
” 5
.
7
1
m
c
5
. 4
4
”
5
.
6
m
c
6.4
1
’’
0.
2
1 30.5cm
3
PROPANE TANK TOP HEATER
12.0’
’
30.5cm
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!