Ghost Axis, Руководство пользователя

Страница: 18 / 24

Page 18
SdMd - Selection of Sound mode
Press
MENU
to select
SDMD
, then press
ENTER
to start the adjustment. The display shows «
SD1
» to
«
SD4
». Select the desired Sound program with the
UP & DOWN
keys. Press
ENTER
to validate the selection.
Auto - Selection of automatic mode
Press the
MENU
button until
Auto
is displayed then press
ENTER
.
The display shows «
AU1
» to «
AU4
». Select the desired program with the
UP & DOWN
keys. Press
ENTER
to
validate the selection, then set the desired scrolling speed between “
SP0
” (slowest) and “
SP9
” (fastest) with
the
UP & DOWN
keys. Press
ENTER
to validate.
Sens - Adjustment of sound sensitivity:
Press
MENU
, select
SENS
and press
ENTER
to start setting. Use the
UP AND DOWN
keys to adjust the
sound sensitivity from
0-100
. Press
ENTER
to validate.
Led - Adjusting the display backlighting.
Press
MENU
until
LED
is displayed and press
ENTER
. «
ON
», or «
OFF
» is displayed. Use the
UP and DOWN
keys to select the function.
If
ON
is selected, the display will always remain on.
If
OFF
is selected, the display turns off after 2 minutes.
Press
ENTER
to confirm your choice then
keep the key pressed for 3 seconds
to confirm the change of
state.
Pan - Reverse Pan
Press
MENU
, select
PAN
and press
Enter
to configure the inversion. Press
UP or DOWN
to select
NO
(normal pan rotation direction) or
YES
(reverse pan rotation direction), then press
ENTER
to confirm.
Tilt - Tilt inversion
Press
MENU
, select
TILT
and press
Enter
to configure the inversion. Press
UP or DOWN
to select
NO
(normal tilt rotation direction) or
YES
(reverse tilt rotation direction), then press
ENTER
to confirm.
VER - Version display
Press
MENU
, select VER and press
Enter
to display the firmware version.
rSet - projector reset
Press
MENU
, select
RESET
and press
Enter
to confirm your choice then
keep the key pressed for 3 se-
conds
to confirm the projector reset.