Updated February 2016
Add An Additional Remote Transmitter To Control the Gate
Step LED/Alarm
Before Pressing
Button(s) Sequence
to Press
LED/Alarm
After Pressing
Description
3
Press & release
or
on Remote B, the
Learning Remote.
Remote LED goes Indicates that Learning remote button
pressed in this step is now programmed
to operate the same gate as the button
pressed in step 2 on the Teaching remote
operates.
GENERATING A NEW TRANSMITTING KEY CODE
CAUTION
Please READ and PROCEED with EXTREME CAUTION
Each GHOST CONTROLS® remote transmitter has a unique key code sequence. Once a new key se-
quence is generated, the previous key code is lost. The new key code will need to be programed or “learned”
into the gate operator to control the gate.
Step LED/Alarm
Before Pressing
Button(s) Sequence to
Press
LED/Alarm
After Pressing
Description
1
Press & hold
AND
simulataneously for 10
seconds on Remote until the
LED goes
LED on Remote
goes
Tells the Remote transmitter that
you are going to generate a new code.
Step 2 & 3 must be completed within
5 seconds while the LED is lit.
2
Release
AND
3
Remote LED is
Press & release
or
on Remote
LED goes
The remote button pressed in this
step is now generating a new code.
