background image

H56.0.02.6C-01 

Operating Manual GTH 1150  

Page 4 von 10 

 

 

_____________________________________________________ 

_____________________________________________________________________________ 

 

1.5  Reasonably foreseeable misuse 

 

This device must not be used at potentially explosive areas!  

Do not use these products as safety or emergency stop devices or in any other application 
where failure of the product could result in personal injury or material damage. 
Failure to comply with these instructions could result in death or serious injury and 
material damage. 

 

This device must not be used at a patient for diagnostic or other medical purpose. 

1.6  Safety guidelines 

This device has been designed and tested in accordance with the safety regulations for electronic devices. 
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures 
and special safety advises given in this manual will be adhered to when using the device. 

 

If there is a risk whatsoever involved in running it, the device has to be switched off 
immediately and to be marked accordingly to avoid re-starting. 
Operator safety may be a risk if: 
- there is visible damage to the device 
- the device is not working as specified 
- the device has been stored under unsuitable conditions for a longer time. 
In case of doubt, please return device to manufacturer for repair or maintenance. 

 

Due to the pointed probe design there is a risk of stitch injury for devices with insertion 
probe. 

 

Trouble-free operation and reliability of the device can only be guaranteed if the device is 
not subjected to any other climatic conditions than those stated under 0 

 

Specification.If the device is transported from, a cold to a warm environment condensation 
may cause in a failure of the function. In such a case, make sure the device temperature 
has adjusted to the ambient temperature before trying a new start-up. 

2  Product description 

2.1  Scope of delivery 

The scope of supply includes: 

GTH 1150 

GTH 1150- Gourmet- SET 

Device 

Device 

9V- battery 

9V- battery 

Operating Manual 

Operating Manual 

 

Sensor GTE 130 OK 

 

 

Содержание GREISINGER GTH 1150











Отзывы: