S15.0.X1.6C-03
Operating manual GNG 10 (/3000) and GNG 5 / 5000
page 3 of 6
_____________________________________________________
_____________________________________________________________________________
3 Safety Instructions
The trouble-free operation and reliability of the device cannot be guaranteed unless the standard safety
measures and special safety advises given in this manual will be adhered to when using it.
1.
Trouble-free operation and reliability of the device can only be guaranteed if it is not
subjected to any other climatic conditions than those stated under “Technical Data”.
Transporting the device from a cold to a warm environment condensation may result in a
failure of the function or even destroy the device. Because of this make sure that the
device temperature has adjusted to the ambient temperature before trying a new start-up
2.
Whenever there may be a risk whatsoever involved in running it, the device has to be
switched off immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if
- there is visible damage to the device.
- the device is not working as specified.
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
3.
Do not use this product as safety or emergency stop device or in any other application
where failure of the product could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and
material damage.
4.
Take care not to damage or destroy the housing or the insulation.
Do not use the device if the housing or insulation is damaged.
5.
This device must not be used at potentially explosive areas!
The usage of this device at potentially explosive areas increases danger of deflagration,
explosion or fire due to sparking.
6.
This device is not constructed for use in medical applications.
7.
Do not open the case!
For repair or maintenance purposes, please send the device back to the manufacturer.
8.
When used in conjunction with other devices, observe the operating instructions and
safety notices of connected devices.
9.
Unplug the device if it is not in use or for cleaning purposes.
Use a dry cloth to clean the case
10.
The surface of the casing will heat up intensely during prolonged operation at a rated
load. Danger of burns!
Never operate the device when partially or fully covered. This will avoid damages due to
overheating.
