G 1114
Operation | 5
B-H88.0.12.DB2-1.1
11 / 29
5
Operation
5.1
Commissioning
The product is switched on with the
. It may be necessary to configure
the product after switching on. See
.
Sufficiently full batteries are inserted in the product.
Press the
.
Automatic shut-
off
Automatic shut-off activated. The product is
switched off if no buttons have been pressed after
the adjusted time
.
Offset correction Calibration of the pressure sensor by the customer
.
Gradient correc-
tion
Calibration of the pressure sensor by the customer
.
Nautical norm
correction
Nautical norm correction active. Display air pres-
sure compensated to sea level
The product is now ready for measurement.
5.2
Configuration
The following steps describe how to adapt the product for your purposes.
NOTE
There are various configuration parameters available depending on the product ver-
sion and configuration. These can vary depending on the product version and configu-
ration.
In order to configure the product, you must first open the
menu. The
menu is opened as shown in the illustration.
The product is switched on.
