E40.0.1X.6C-07
Operating Manual EB-
Logg 80K…
page 5 of 14
3.
Product description
3.1 Required accessory
The logger is configured, started and read-out via the
EASYBus
-interface.
Therefore the following accessories are required:
Level converter
- RS232 <>
EASYBus
(i.e. EBW 1, EBW 64, EBW 240)
- USB <>
EASYBus
(i.e. EBW 3)
Connecting cable: level converter to
EB-Logg
GSOFT 40K
(version >7.14):
Windows software to start the logger and read out the logger-data
EASYBus-Configurator
(version >2.0):
for the configuration of the extended settings
3.2
Notes on the logger’s delivery status
The delivered logger is in a “sleep mode”, that means nothing is displayed and the power
consumption is at its minimum. When there is a communication with the software for the
first time, the EB-Logg
leaves the sleep mode and ›Stop‹ is displayed. Then the device is
ready for operation.
Note:
That sleep mode (nothing is displayed) cannot be restored again.
“Stop“ or “Halt“ are similar to the sleep mode. Both of that operation
modes ensure minimum consumption.
Note:
Logger start over keypad:
before logger start over keypad, logger time must be adjust with
GSOFT 40K.
3.3 Connection
EASYBus
assignment of jack
(view on pins)
EASYBus
not used
Sensor
or cable with sensor
(EB-Logg 80 KH)
or sensor connection
(with option “-AFK”)