HD2050
- 7 -
V1.2
2.1.1.2
Use with HD2050.30 facade louds HD2050.20 power amplifier
Before making any connections make sure that the "LEVEL" potentiometer is set to minimum
by turning the knob all the way counterclockwise (position 0).
Set the PRESET switch on JA4012 position for use with HD2050.30 loudspeaker.
If user needs a custom equalization, set the switch "User DSP" to ON. To create, edit and load
in the DSP a custom equalization refer to page Errore. Il segnalibro non è definito. in the
specific section of this manual.
Connect the Neutrik SPEAKON signal cable to HD2050.30 input connector; then connect the
other head of the cable to “OUTPUT” amplifier connector
Connect the supplied HD2050.2 power cord to AC LINE amplifier’s input socket; then connect
the other side to the wall socket
NB: the Neutrik POWERCON cable connector (amplifier side) also serves as a power switch
of the apparatus. As soon as the POWERCON connector is plugged in, rotate it by about 45°
clockwise in order to turn ON the amplifier.
ROTATE CLOCKWISE TO TURN ON AMPLIFIER
2.1.1.3
Use with HD2050 dodecahedron + HD2050.40 subwoofer + HD2050.20
amplifier
Before making any connections make sure that the "LEVEL" potentiometer is set to minimum
by turning the knob all the way counterclockwise (position 0).
Set the PRESET switch on JA12 position for use with HD2050 dodecahedron.
