GHM Delta OHM HD2013.3, Руководство по эксплуатации

Страница: 11 / 26

HD2013.3
- 11 -
V1.2
instrument.
RS485 communication parameters:
Command Reply Description
CMBn &| Sets the Baud Rate:
ƒ
1200 if n=0
ƒ
2400 if n=1
ƒ
4800 if n=2
ƒ
9600 if n=3
ƒ
19200 if n=4
ƒ
38400 if n=5
ƒ
57600 if n=6
ƒ
115200 if n=7
Default : 19200 (n=4)
RMB & n| Reads Baud Rate setting
CMPn &| Sets parity and stop bits:
ƒ
8N1 if n=0 [No parity, 1 stop bit]
ƒ
8N2 if n=1 [No parity, 2 stop bits]
ƒ
8E1 if n=2 [Even parity, 1 stop bit]
ƒ
8E2 if n=3 [Even parity, 2 stop bits]
ƒ
8O1 if n=4 [Odd parity, 1 stop bit]
ƒ
8O2 if n=5 [Odd parity, 2 stop bits]
The number of data bits is fixed to 8.
Default : 8E1 (n=2)
RMP & n| Reads the setting of parity and stop bits.
CMWn &| Sets waiting time after transmission with MODBUS-RTU
protocol:
ƒ
Immediate reception if n=0 (violates protocol)
ƒ
Waiting 3.5 characters if n=1 (respects protocol)
Default : Immediate reception (n=0)
RMW & n| Reads the setting of waiting time after transmission with
MODBUS-RTU protocol.
Precipitation detection settings:
Command Reply Description
CRLRn &| Sets the resolution with which the percentage of dry
sensitive surface of the sensor is detected:
ƒ
1% if n=0
ƒ
0.1% if n=1
Default : 1% (n=0)
RRLR & n| Reads the resolution with which the percentage of dry
sensitive surface of the sensor is detected.
CRTn &| Sets the precipitation detection threshold to n value,
where n is the percentage of dry sensitive surface of the
sensor below which the instrument indicates that a
precipitation is in progress.
If the 0.1% resolution is set, the value must be ex-
pressed in tenths (for example, write 950 to indicate
95.0%).
Default : 95 (=95% with 1% default resolution)
RRT & n| Reads the setting of the precipitation detection thresh-
old.