GHM Group
– Martens
GHM Messtechnik GmbH | Kiebitzhörn 18 | 22885 Barsbüttel | Germany
Phone +49-40-670 73-0 |
4
1.2 Safety instructions
Read the product description before commissioning the device. Ensure that there
are no limitations for use of the product for the relevant applications.
The owner is responsible for ensuring the fault-free operation of the
device. The owner is obligated to ensure compliance and to observe the
required work and safety measures of the current applicable regulations
for the entire duration of use.
1.3 Product liability and warranty
Exclusion of liability:
The contents of the operating manual have been checked to ensure conformity with
the described device. However, deviations cannot be entirely ruled out. Therefore,
we cannot assume any guarantee for complete conformity. The specifications in
this document are checked regularly and any necessary corrections are
incorporated into subsequent versions. This document is subject to technical
changes. In addition, all claims are based on the valid 'Standard Terms for the
Supply of Products and Services of the Electrical Industry'.
GHM Messtechnik cannot inspect or repair any devices without the
required form having been filled in completely (see chapter 6 Return to
manufacturer, page 25).
1.4 Standards and directives
Conformity with Directive 2014/30/EU
CE conformity
EN 61326-1: 2013
EN 61326-2-2: 2013
1.5 Approvals
EN 14597:2012
Temperature control devices and temperature limiters for
heat generating systems
EN 61508:2011 SIL2
Functional safety of electrical/electronic/programmable
electronic safety-related systems
DANGER
