S01.0.0X.6C-19
Installation and Operating Manual GEWAS 191 AN / N
page 6 of 6
11
Specification
Power supply:
220 - 240V, 50/60Hz (control unit)
Power consumption:
approx. 3 W
Sensor input:
Connection for water sensor with max. 10 m cable length
Control output:
by socket outlet in device housing (only for GEWAS 191 AN)
(
at GEWAS 191N the outlet is direct connected to the plug)
Switching voltage:
equivalent to supply voltage
Switching current:
max. 16A (ohmic load)
Solenoid valve:
max. working pressure: 600 kPa (6 bar) servo controlled
pressure difference infeed/outfeed >50 kPa (0,5 bar)
Working temperature:
0 to 50 °C
Dimensions:
control unit:
110 x 65 x 45 mm (L x W x H)
solenoid valve:
82 x 102 x 42 mm (L x W x H)
Directives and standards:
The instruments confirm to following European Directives:
2014/30/EU - EMC Directive
2014/35 EU - Low Voltage directive
2011/65/EU - RoHS
Applied harmonized standards:
EN 61326-1 : 2013
emissions level: class B
emi immunity according to table 2
Additional fault: <1 %
EN 60335-1 : 2012
protection IP20
pollution degree 2
Other approvals:
The solenoid valves are in accordance with the Regulation (EU) 1183/2012 and
1935/2004. The solenoid valves are according to the requirements of the KTW rec-
ommendation, the KTW-Leitlinie of the German Umweltbundesamt (Bgesundhbl.
2005) and the DVGW-worksheet W270.
