Audio @ Video @ Data Communications
GHIELMETTI AG,
Industriestrasse 6, CH-4562 Biberist, Schweiz - www.ghielmetti.ch - [email protected] -
+41 32 671 13 13 -
+41 32 671 13 14
2/12
Introduction
Thank you for choosing a GHIELMETTI product.
We are convinced that your choice will prove to be a wise and worthy decision for many
years to come. Your GHIELMETTI product has been tested for performance at the factory
according to the specifications given for the system in this manual. However, before
putting the device into operation we kindly ask you to read this manual and act
according to the instructions given. All information given in this document is property of
Ghielmetti AG. To the knowledge of Ghielmetti AG there are no errors in the manual.
Should any errors be discovered, please notify us. Ghielmetti will under no
circumstances accept responsibility neither for errors in this manual, nor consequences
of such errors.
Warranty
Ghielmetti warrants products for one year from date of purchase against defects in
materials and workmanship. During the warranty period, Ghielmetti will, at its option,
either repair or replace products that prove to be defective. The warranty does not cover
any defects caused by accident, misuse, neglect, improper or inadequate installation or
maintenance by buyer, buyer-supplied software or interfacing, unauthorized
modification, operation outside of the environmental specifications for the product, or
improper site preparation or maintenance.
Safety Considerations
General
This product and related documentation must be reviewed for familiarization with safety
markings and instructions before operation. This product has been designed and tested
in accordance with international standards.
STOP
Safety Earth Ground
This is a Safety Class 1 product (a protective earth terminal GND is provided).
An uninterrupted safety earth ground must be provided from the main power source to
the product input wiring terminals, power, cord, or supplied power cord set.
Whenever it is likely that the protection has been impaired, the product must be made
inoperative and secured against any unintended operation.
Installation
Initial Inspections
Check the contents of the shipment for completeness and possible transport damage.
If the contents are incomplete or damaged, contact Ghielmetti immediately to get the
concerned parts repaired or replaced.
Before Applying Power
Verify that the product is configured to match the available main power source per the
input power configuration instructions provided in this manual.
Servicing
Servicing, adjustments, maintenance or repair of this product may be performed by
qualified personnel only.
