Ghibli & Wirbel FR30 Touch Скачать руководство пользователя страница 22

www.ghibliwirbel.com 

Professional Cleaning Machines Since 1968

ENGLISH 

- 16

(53) and let the water drain completely.

-  Wash the inside of the tank, leaving the 

drain hose open and adding clean water 

through the top opening.

-  When cleaning is complete, lift the tube 

(15), leaving the tap (53) open; couple 

the tube in its recesses.

-  To completely drain the water from the 

tank (5) disconnect the tube (57) from the 

quick connector (58) then turn the con-

nector downwards, letting the water drain 

completely; or remove the filter cover 

(59).

12.1.b - Cleaning the recovery water 

tank (Fig. 17)

 WARNING:

At the end of the washing operations, it 

is compulsory to clean the recovery wa-

ter tank to prevent deposits or scaling 

and the proliferation of bacteria, odours 

or mould.  

-  Drain the recovery water as shown in the 

relative paragraph, positioning the ma-

chine over a drain outlet.

-  Remove the cover (6).

-  Leaving the hose (12) lowered and the 

cap  off,  pour  water  into  the  tank  (14) 

through a hose, cleaning it until clean wa-

ter comes out of the drain hose.

-  Clean the level probes (55) using a damp 

cloth, taking care not to deform them.

-  Replace all the components in reverse 

order.

12.1.c - Cleaning the squeegee (Fig. 

4)

In order to clean the squeegee correctly (11), 

it is necessary to remove it as follows:

-  Disconnect the hose (13) from the squee-

gee (11).

-  Loosen the knobs (32) and remove the 

squeegee (11).

-  Wash the squeegee and in particular the 

rubber blades (60) and the inside of the 

aspiration connector (33).

NOTE:

If, during washing, it is clear that the rubber 

blades (60) are damaged or worn, it is neces-

sary to replace them or turn them over.

-  Replace all the components in reverse 

order.

OPERATIONS TO 

PERFORM WHEN 

NECESSARY

12.1.d - Cleaning the clean water fil-

ter (Fig. 18)

NOTE:

 

Before  cleaning  the  filter,  make  sure  the 

clean water tank is empty.

-  Unscrew and remove the cover (59).

-  Remove the filter (17) and wash it in run-

ning water.

-  Refit the filter (17) in its seat, then tighten 

the cover (59). 

Manuale FRECCIA RAPID 30 Touch_49026100_2ed_07-2018.indd   16

23/07/18   16:24

Содержание FR30 Touch

































Отзывы: