64
EN
IMPORTANT - READ CAREFULLY BEFORE USING THE MACHINE.
Keep for future reference
Your product has been engineered and manufactured to high
standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of
rugged, trouble-free performance.
For use with 43.2V 4Ah (146 Wh) battery only.
gENERAL SAfETY WARNiNgS
WARNiNg
Read all safety warnings and all instructions.
Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
iNTENDED USE
This chainsaw is designed for cutting branches, trunks, logs
and beams of a diameter determined by the cutting length of
the guide bar. It is only designed to cut wood. It is only to be
used in an outdoor, domestic application by adults.
User type:
This machine is intended for use by consumers,
i.e. non-professional operators. The machine is intended for
“DIY” use only.
Do not use the chainsaw for any purpose not listed above.
This chainsaw is not to be used for professional tree services.
It is not to be used by children or by persons not wearing
adequate personal protective equipment and clothing.
RESiDUAL RiSKS:
Even with the intended use of the appliance, there is other
risk which cannot be prevented. According to the type and
construction of the appliance, the following potential hazards
might happen:
■ Contact with exposed saw teeth of the saw chain (cutting
hazards).
■
Access to the rotating saw chain (cutting hazards).
■
Unforeseen, abrupt movement of the guide bar (cutting
hazards).
■ Flung out of parts from the saw chain (Cutting / injection
hazards).
■
Flung out of parts of the work piece.
■
Inhalation of work piece particles.
■
Skin contact with the fuel oil.
■
Loss of hearing, if no ear protection is used during work.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains
operated (corded) power tool or batteryoperated (cordless)
power tool.
WORK AREA SAfETY
■
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
■
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust.
Power tools create sparks which may ignite the
dust or fumes.
■
Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
ELECTRiCAL SAfETY
■
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
■
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
PERSONAL SAfETY
■
Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A lapse of attention while operating
power tools may result in serious personal injury.
■
Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat or hearing protection
used appropriately will reduce personal injuries.
■
Prevent unintentional starting.
Ensure the switch is in
the off position before connecting to power source and/
or battery pack and when picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
■
Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
■
Do not over-reach.
Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
■
Dress properly.
Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
■
if devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
■
Do not force the power tool.
Use the power tool for the
application. The correct power tool will do the job better
and safer at the rate for which it was designed.
■
Do not use the power tool if the switch does not turn it
on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
■
Disconnect the battery pack from the power
tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
■
Store idle power tools out of the reach of children and
Содержание 171501308/0
Страница 1: ...manual code nm 171501308 0 Homologation name CS 48 Li Date 09 2014...
Страница 2: ...1...
Страница 3: ...2 1 10 9 2 3 44 4 5 7 6 fig 1 fig 3 fig 5 fig 7 fig 2 fig 4 fig 6 fig 8 16 17 18 19 20 21 22 3 4mm 43...
Страница 5: ...4 fig 17 fig 19 fig 21 fig 18 fig 20 fig 22 ON OFF 45 46 52 49 50 47 51 48 54 53...
