21
10. USE
Be sure to read the manual carefully before using the device.
Before you start up the machine, the following must be checked by licensed and
specialised technical staff:
• System hooked up and earthed correctly.
• System hooked up to its electrical and water supplies correctly.
The machine is designed to expose the ice cream to the temperature requested by the client,
which may not be lower than -18/-
20°C.
After the refrigeration function has been started, wait for approximately 60 minutes before
placing the ice cream inside the display unit, so that the operating temperature has time to
stabilise. This period may vary in relation to the ambient conditions.
11. CLEANING
Cleaning the appliance must be divided into internal and external.
You must follow those articles before you start cleaning.
Stainless Steel parts of the device: Use only warm water and non-
aggressive detergents.
Polycarbon and Acrylic parts of the device: Wash with warm water using
a soft cloth or chamois cloth.
Glass parts of the device: Use specially manufactured products to clean
the glass.
Do not peel ice that may form on the device wall during cleaning
with sharp tools. You can damage the surface.
Содержание EITC65
Страница 1: ...Manual Number V002 19 02 2019 EITC65 EITC95 GELATO SHOWCASE USER GUIDE OPERATION MANUAL...
Страница 18: ...17 USE OF LEDS Each LED function is described in the following table...
Страница 19: ...18 LOCAL ALARMS...
Страница 21: ...20 ERRORS When the cause of the error disappears the device restores normal operation...