GGM Fina. HS20. 180. E, Инструкция по эксплуатации

Страница: 17 / 20

regulator
Warning
：
check that no broken on the glass is found before operation.
OFF: the heater stop work
HIGH: maximum temperature position
LOW: minimum temperature position
1. Depress and turn control knob clockwise to OFF position.
2. Fully open gas valve.
3. Depress control knob and turn knob counter -clockwise to IGNITE position, then to PILOT position
(You should hear a clicking sound).
4. Keep the control knob depressed last for 60 seconds, then turn the control knob back to ‘OFF’position.
5. Repeat step 3 several times until the pilot lights.
NOTE: If the pilot light has not ignited, turn heater control knob to OFF position, fully close gas valve,
wait 5 minutes, then repeat steps 2–4 of the Lighting Instructions.
6. Push in and turn the control knob to LOW position, then release control knob. If you want a higher
temperature, push in the control knob and turn counterclockwise to HIGH position.
1. Fully close gas valve.
2. Turn control knob clockwise to OFF position.
Variable control knob
Pointer
LOW
HIGH
PILOT
FF
O
I
GN
I
TE
Pus
h to
turn