GGM gastro GGM24, Руководство по эксплуатации и обслуживанию

Страница: 13 / 27

13
Image 8.2. Syilicon bar placed on the lid
2. Replacement of the sylicon bar on the lid (Image
8.2).
3. Replacement of electric resistances, sealing bar
teflon (Image 8.3) and the gasket on the lid
(Figura 8.4) almost every 200 working hours.
image 8.3. Sealing bar teflon
Image 8.4. Gasket on the lid
In case of electric shocks causing a bad
working of the keyboard and/or the electronic
board, take the USB device out and connect it
again after a few seconds, in order to start it
again properly.
In order to grant a proper working of the
keyboard, it is recommended to use the
equipment supplied by the manufacturer
company only.
The check of pump, filters and electrovalves
must be done every 2000 working hours by
authorized personnel only.
Funzionamento:
Nelle macchine con orologio si alterna la scritta della
data/ora con il numero programma.