GGM gastro EMP.PLS.US-1, Быстрый старт

Страница: 9 / 15

9
AMERICAN GAS GRILL
Kasap Tip Dik Buzdolapları
G INJECTOR CHANGE AND GAS SETTING
Gas
Family
Gas
EMP.PLS.US-1 EMP.PLS.US-2
Injector

mm Injector

mm
2
G20
Ø1,50 x 6 Ø1,50 x 9
G25
Ø1,50 x 6 Ø1,50 x 9
3
G30
30 mbar
Ø1,0 x 6 Ø1,0 x 9
50 mbar
Ø1,0 x 6 Ø1,0 x 9
G31
37 mbar
Ø1,0 x 6 Ø1,0 x 9
30 mbar
Ø1,0 x 6 Ø1,0 x 9
Change of Burner Injector;
1. Rip off the injector at the entrance of burner with suitable equipment
2. Change "A" injector by paying attention to the datas at chart with suitable injector.
( Image 1)
3. Set the burner air entrance "F" setting by loosening "B" bolt and moving venturi pipe
forward-back. (Image 2)
4. Change "C" injector by paying attention to the datas at chart with suitable injector.For
this it is enough to take off "D" fitting and pull the gas pipe to down. (Image 3)
Setting of Half Flame;
1. Remove the tap button and set by turning tap half flame screw "K" with suitable
screwdriver.(Image 4) Turn it to left for transformation from LPG to NG,turn it right for
transformation from NG to LPG.
2. After this process,operate the appliance and set it not to be deflated during transition
from full flame to half flame.