OTTAWA DRESSING TABLE_STOOL SET - ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Batch No. 250417
Page 2 of 12
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
WARNINGS
This product is designed to hold 10
Kg spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and
a clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on
a clean floor to prevent any accidental scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the floor.
Please s
tand item close to a wall
and
use the anti-tilt strap (S) to prevent any accidents.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until all parts are assembled or as advised in this guide.
over-tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.
stand on the Stool
