Version 1 - 200
707
Page
2
of
14
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
To clean, wipe with a damp cloth.
Never use scourers, abrasives or chemical cleaners.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
This product is designed to hold 8 Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
MORITZ ONE DRAWER ONE DOOR CABINET ASSEMBLY INSTRUCTIONS
This is a slim unit, for safety it is designed to fix to the wall using the anti-tilt bracket (H).
INSTALLATION WARNINGS:
In order to prevent the cabinet tipping over, this product must be installed with the metal
anti-tilt bracket provided (H).
This is essential for the safety of you and your children, the cabinet is not free-standing.
Carefully assess the suitability of the wall to ensure that the fastening device will
withstand the load and forces generated.
Walls can be quite different in construction so only fixings for a standard block wall are
supplied - otherwise please choose the most suitable fixing for your wall type - if in doubt
consult an expert.
When drilling the wall always be sure the area to be drilled is free from hidden electrical
wiring, water or gas pipes.
The fixing of this product to the wall must be done carefully following the detailed stages
in this Assembly Instruction. See Steps 8 and 9.
