Version 1 - 201211
Page
9
of
10
STEP 8
For this step:
Tools required
Warning: Always ensure the area to be drilled is free from hidden
electrical wires, water or gas pipes.
For this step:
Tools required
STEP 9
E
F
V On the hanging
wall supports make
certain that hooks (x)
are fully extended by
turning lower
screws
anti-clockwise.
(x)
VI
Hang the cabinet onto the brackets by
carefully aligning the end panels so they just miss
the outer sides of the brackets. To make cabinet
level, turn upper screw clockwise on one side only.
VII
When unit is
level, tighten lower
screws clockwise so
clamping unit to wall -
do not over-tighten.
I
Decide on the height
you want the cupboard to be
then holding one bracket level,
mark dead-centre of the three
holes.
Following the diagram, position
and mark holes in the second
bracket.
II
Drill the
holes in the wall.
F
FOR SAFETY,
PLEASE USE ALL
THREE WALL
FIXINGS IN THE
BRACKET
IV
III
Knock in your wall
plugs or other wall fixings.
Fix brackets to
the wall.
Fittings required
F x2
468mm
same
horizontal
level
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS
