H
MORITZ TALL CABINET ASSEMBLY INSTRUCTIONS
For this step:
Tools required
Version 1 - 200707
Page
10
of
14
STEP 8
STEP 9
Fittings required
For this step:
Tools required
Fittings required
Warning:
Always ensure the area to be drilled is
free from hidden electrical wires, water
and gas pipes.
II.
III.
IV.
Carefully drill holes
in the wall.
I.
In the final position the cabinet is to be
used, place it flat against the wall. From
underside of the top carefully mark the
wall with a sharp pencil, dead-centre of
the holes in the short legs of
the metal Anti-tilt Bracket.
Choose a suitable
wall fixing method.
P
H
Hold cabinet firmly against
the wall. If necessary, loosen
screw (P) a little and push
each metal bracket (H) until
touching the wall. Screw into
your wall fixings making sure
brackets are firm, finally re-
tighten screw (P).
Choose a suitable
screw for your wall
fixing method.
P
H x1
P x1
