Version 1 - 180520
Page
2
of
12
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge. Do not use solvent based cleaners or detergents
as they can bleach or damage the product.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
This product is designed to hold 15Kg distributed evenly throughout the product.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs/base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to
construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.
JAKARTA CONSOLE HALL DESK WITH DRAWERS ASSEMBLY INSTRUCTIONS
N.B. For safety reasons, we recommend the use of the anti-tilt wall fixing
strap
(S)
to
prevent any accidental tipping over of the product.
Walls
can be quite different in construction so fixings are not supplied - choose the most
suitable fixing for your wall type - if in doubt consult an expert.
When drilling the wall
always be sure the area to be drilled is free from hidden electrical
wiring or gas / water pipes
.