JAKARTA COMPACT SIDEBOARD ASSEMBLY INSTRUCTIONS
9
x2
Version 1 - 210811
Page
13
of
14
Fittings required
For this step:
Tools required
STEP 13
Initially in each door fix 4 screws (
E
) through
the centre of the elongated holes in each
hinge plate, screwing into the side panel.
If it is necessary to re-align the door vertically,
loosen the screws (X) and adjust the hinge plates
up or down (Y) until gaps at top and bottom of
the door are even, then re-tighten the screws.
X
Y
Once all the adjustments are complete
and both doors are aligned, fix remaining
x8 screws (
E
) into the other hinge plate holes
then check all the other hinge screws are
tight.
Please do not over-tighten.
E
x8
E
x8
E
x2
E
x2
