JAKARTA TWO DRAWER TV UNIT ASSEMBLY INSTRUCTIONS
Batch No. 140317
Page
2
of
13
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
WARNINGS
This product is designed to hold 30Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
This product should only be used on a firm and level floor.
Keep small parts out of
the
reach of children.
Make sure the base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to
construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.
