Version 1 - 210701
Page
2
of
11
GALICIA PAIR OF WALL HANGING BEDSIDE
S
ASSEMBLY INSTRUCTIONS
IMPORTANT
-
READ CAREFULLY
-
RETAIN
THESE
INSTRUCTIONS FOR
FUTURE
REFERENCE.
INFORMATION
CARE INFORMATION
To clean, wipe with a damp cloth.
Never use scourers, abrasives or chemical cleaners.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
This product is designed to hold
6
Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
This is Bedside is designed to hang from the wall, only use the supports provided.
In order to prevent the cabinet falling down this product must be installed with the wall
hanging supports provided - do not use any other means to hang the product.
Carefully assess the suitability of the wall to ensure that the fastening devices will
withstand the load and forces generated. Walls can be quite different in construction so
fixings are not supplied - choose the most suitable fixing for your wall type - if in doubt
consult an expert.
When drilling the wall always be sure the area to be drilled is free from hidden electrical
wiring, water or gas pipes.
The assembly of this product must be done carefully following the detailed stages in
this Assembly Instruction.
Installation of this product needs to be carried out in accordance with the following
instructions, see Steps 9 & 10.
