Page
2
of
16
CANYON MULTI UNIT ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Version 1 - 21081
8
INFORMATION
WARNINGS
This product is designed to hold
18
Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and
a clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on
a clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools are not included unless specified in parts list.
This product should only be used on a firm and level floor.
Keep small parts out of the reach of children.
Make sure the base remains in contact with the floor.
For safety, you must use the anti-tilt strap supplied (Q).
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over-tighten t
ighten screws or bolts.
use this product if parts are missing, damaged or worn.
climb, sit or stand on the product.
CARE INFORMATION
To clean, wipe with a damp clean cloth.
Never
use
scourers, abrasives
or
chemical
cleaners.
Do
not
use
solvent
based
cleaners
or detergents
as
they
can
bleach
or
damage
the
product.
