Gfp 865DH-4
March 2021
29
21. Installing the Rear Rewind Assembly
1.
Remove 4 screws and inserts bolted inside each side frame.
2.
Bolt rewind motor assembly to control side frame and rewind bracket to opposite side frame
where the inserts were located.
3.
Place rewind tube onto the brackets.
4.
Plug rewind motor into side frame plug outlet.
Operating rewind motor:
FORWARD/OFF/REVERSE
Allows the operator to run the
unit in forward or reverse.
COMBINE / SINGLE
Used if there is a separate rewind unit
on the front. Most jobs will only
require the use of Single.
Clutch Knob increase/decrease the motor
drive for heavy or light webs.
TORQUE
Increase/decrease the motor power
for heavier webs.
