Gfp 563TH-3
January 2019
13
9F. Align machine to stand
1.
Screw one Alignment bolt through the alignment bracket into machine frame on the
outside
of each stand leg.
Note: You may need to slide machine to align holes in machine frame with machine
stand
2.
Screw two (2) Anchor bolts through the stand into the bottom of machine frame on
the
inside
of each stand leg
10. Additional Installation items
1.
Check drive chains for tightness
2.
Check all drive set screws for tightness
3.
Check all electrical connections and input power and test for proper operation
Alignment bolt
Alignment bolt
Outside stand leg
Anchor bolts
Inside stand leg
