13
EN
WATCHING TV
INTRODUCTION
CONNECTION
INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
INPUT
SELECT
ANALOG MODE
DIGITAL MODE
VIDEO1
VIDEO2
COMPONENT
• To use the video (rear) or S-video input jack on the
unit, select “VIDEO1”.
• To use the video (front) input jack on the unit, select
“VIDEO2”.
• To use the component video input jack on the unit,
select “COMPONENT”.
Switching Audio Mode
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
TV
While receiving an MTS broadcast, press
[AUDIO]
repeatedly to cycle through the available audio
channel.
AUDIO
MAIN
SAP
MONO
MAIN
: Outputs main-audio
SAP
: Outputs second audio program
MONO
: Outputs mono-audio
• The current mode will automatically disappear in a
few seconds.
DTV
1
Press
[AUDIO]
to display the currently selected
language and the number of available languages.
AUDIO
KABC CH 95-03
A Day of Memories
ENGLISH 1/3
2
Press
[AUDIO]
repeatedly to cycle through the
available audio languages.
AUDIO
ENGLISH
ESPAÑOL
FRANÇAIS
• Available languages differ depending on the
broadcast. “OTHER” is displayed when the audio
language cannot be acquired, or the acquired languages
are other than English, Spanish or French.
• The current mode will automatically disappear in a
few seconds.
Note:
•
Pressing
[AUDIO]
does not control external audio device.
5
TV Screen Display Mode
DTV
2 types of display modes can be selected in the digital mode when the
broadcasting station is sending 16:9 video signal.
1
Press
[MENU]
to display the main menu.
MENU
2
Use
[CH
K
/
L
]
to select “DTV SETUP”, then press
[VOL
X
]
.
e.g.) digital TV mode
or
CH
CH
VOL
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
3
Use
[CH
K
/
L
]
to select “DTV DISPLAY”, then use
[VOL
X
/
Y
]
to switch the desired TV aspect ratio.
or
CH
CH
or
VOL
VOL
- DTV SETUP -
DTV DISPLAY [LETTERBOX]
DTVCC
ZOOM
LETTERBOX
[LETTERBOX]
Display the digital-supported program in full-screen.
Black borders will spread in the upper and lower
screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported program.
The right and left side of image will be cut off.
4
Press
[MENU]
to exit.
MENU
Note:
• You may not switch the display mode depending on the
program.
5
P71B1UT_MJ427GG A_EN.indd 13
P71B1UT_MJ427GG A_EN.indd 13
2007/03/22 17:59:34
2007/03/22 17:59:34
