GF-8 Xten Crane System Instruction Manual
Page: 44
The GF-8 Double Ended Connected Steering Base
Offers all the features of the standard base but with GFM’s connected steering system.
The 3 steering functions are controlled from the rear of the dolly by simply flicking a lever.
You can roll from floor to standard 62cm /24,5“ track by just clicking on the track wheels.
Levelling legs and and adapters to 100cm / 39“ track are also available. Provides the
utmost in manouverabilty.
·
Front 2 wheel:
operated from the rear of the dolly. In this mode the front
wheels are steered allowing a minimum circular movement of 258cm / 9' 4" inside
diameter.
·
4 wheel inverted:
all 4 wheels can be turned together giving a “roundy round“
steering effect
·
Rear 2 wheel:
in this mode the rear wheels are steered from the rear of the
dolly.
To change steering mode please observe the following guidlines.
·
Before switching, all wheels must be aligned
·
To position the swicht lever in the required position first release the safety knob (see
next page), found on the opposite side. After switching, reinsert the saftey knob,
(Steering position secured).
Safety knob
Switch lever (here in the upward position)
Dolly Double Ended Connected Steering
