User Manual
9
Setting up the
Heel
and
Toe
values for expression pedal (and ramping function).
Suppose you want to map a parameter knob to the expression pedal or the ramping function :
Turn the knob until you find the desired
Heel
value.
Hold down the knob. After 2 seconds the screen will show the
Heel
/
Toe
information, keep
holding the knob down.
Now turn the knob (while still holding it down) to find the desired
Toe
value. When you find
it, release the knob.
The parameter is now mapped to the expression pedal and ramping function. Rocking the ex-
pression pedal will sweep the mapped parameter to any value within the range specified by
Heel
and
Toe
values.
The
Toe
value set using the above procedure will also be the “
end value
” for the Ramping function.
Heel
position
Toe
position
Changes to the
Heel
and
Toe
values are automatically saved into the current preset.
ROSSIE
FILTER
9. Expression / Ramping Setup
Heel 20
Toe 80
Up to 3 primary parameters may be mapped to the expression pedal / ramping function.
Push the knob’s button to toggle the parameter mapping.
Exp Pedl
mapped
Exp Pedl
unmapped
PUSH once
PUSH once
